SLW 01P

Устройство смыва унитаза с пьезо кнопкой, для напорной воды, 24 В пост.

Характеристики

vandal-proof
toilet flushing unit for a pressure water from water distribution, isn´t possible to use it for toilet with tank
water flows after soft push of the piezo button
adjustable flushing time from 0,5 to 15,5 seconds, standardly adjusted to 8 seconds
parameters adjustment by SLD 04 remote control
function switch ON/OFF
possibility of additional manual flush by push-button (f.e. during the cleaning)
automatic hygiene flush after each eight flush or 24 hours non using of toilet
electromagnetic valve with a possibility to regulate rate of flow, possibility to flush a toilet by turn of coil of the electromagnetic valve (f.e. in the case of electricity blackout)

Арт. №	14015
Название	SLW 01P

Спецификация поставки

SLW 01P - supply No. 14015 - stainless steel stamped cover with an integrated electronics and piezo button; stainless steel mounting box with a brass screw-coupling and electromagnetic valve (1 pc); outlet fitting with a rubber seal (as direct connection to the PVC pipe with outer d = 40 mm)

Технические данные

Dimension of mounting box: approx. 145 x 155 x 100 mm
Dimension of stainless steel cover: 170 x 170 x 10 mm
Operating voltage: 24V DC external
Recommended flow pressure: min. 0,3 - 0,8 MPa
Rate of flow: 60 l/min. (inf. data)
Water inlet: d = min. 32 mm (PN 16), male thread G 1˝
Water outlet: outlet fitting with a rubber sealing (as direct connection to the PVC pipe with outer d = 40 mm)